Bravat Commercial Automatic Motion Gold Faucets With Automatic Soap Dispenser
The Bravat Commercial Automatic Motion Gold Faucets With Automatic Soap Dispenser
Commercial Automatic Sensor Faucet; High-traffic ready faucet system—fast-response sensing, anti-false activation control, low-flow efficiency, durable construction, and consistent shut-off timing for water savings. This sensor faucet from Bravat brings a new element of design and cost-effectiveness into every bathroom it is installed. The cylindrical base, the infrared sensor, the elegant curve and the gold finish exudes a stylish and contemporary appeal that is perfect for the modern bathroom. Aside from the voguish design, the Bravat Infrared Electronic Faucet is built with solid brass to ensure its longevity - which is why the manufacturer confidently packs it with a ten years warranty. The infrared sensor is sure to work all the time, releasing water only if there is an object within its range and automatically shutting water flow after preset time. This greatly decreases the amount of water wasted from leaving the tap on. The infrared sensor battery is guaranteed to work up to three years. The energy saving architecture of this electronic sensor faucet ensures you will be able to enjoy this touch-free electronic faucet for years and years to come. Improve hand washing compliance, and minimize waste of water, by using BathSelect touchless bathroom automatic faucet. Immediately reduces water waste by eliminating unnecessary and unattended water flow. BathSelect touchless faucet comes with AC/DC option (hardwired and battery backup)Water Pressure: 0.5 - 7.0 KGS/cm, 10-125 psi. Ideal for commercial use applications in public restrooms, restaurants, office building, public facilities, hospitals. Fits all standard US plumbing.
Sensor faucet complete motion detection operation.
Sensitive Sensor with Infrared AI Smart-Chip
Factory set to 30-second Auto Shutoff (can be adjusted).
Water Pressure: 0.5 - 7.0 KGS/cm, 10 - 125 psi
Solid Brass Construction, Gold Finish
Installation made easy with simplified instructions
Water resistant solenoid enclosure
Advanced energy saving design for long lasting battery life
Comes complete with Hoses & Accessories
Power Supply: AC110V And DC6V (batteries not included)
AC/DC power option.
ADA Compliant.
Can be installed in new or retrofit applications.
Durable Vandal-Resistant Brass Body;
Ideal for commercial use applications in public restrooms, restaurants, office building, public facilities, hospitals.
Fits all standard US plumbing.
Intelligent: with its micro-computer controlling its action,
The faucet will self adjust best detection zone as per the color and shape of lavatory
Flashing light indicator; a diagnostic indicators for power up, low battery, and solenoid function.
Meaning of the codes are described in the installation instructions.
Convenient to maintain; with built-in strainer to prevent sundries from entering the solenoid valve and the strainer is easy to clean
Faucet can be mounted to any sink surface.
Batteries life 8,000 cycles per month and with enough water pressure is approx 5 year service life of the batteries.
Adjustable sensing range; while the factory range is set about 4"to 5"from the sensor, it can be adjusted.
Usage: Commercial / Residential
Diameter of inlet pipe
DN15
Diameter of outlet pipe
DN15
Water Pressure
0.05Mpa - 0.7Mpa
Power and Voltage
DC.6V
AC.220V - 50/60Hz
Power Consumption
0.5MW
<2W
Detection Zone
Factory set 25cm/10" (based on standard inductive board)
Ambient Temperature
1 - 45 ℃ / 33.8 -113 °F
Degree of protection by enclosure
1P56
h2>Bravat Automatic Sensor Faucet water-saving; hygienic; automatically opens and closes
to free hands - no touch, avoid bacteria mutual infections!
A great addition to powder room; kids bathroom, hotels, restaurants, public places, government facilities...!
This Sensor Faucet Applications; Residential, Commercial use & ADA
This faucet is shipped complete. ANSI A112.18.1M CSA Standard B125, 2.2 U.S.
GPM Complies with NSF Standard 61, Section 9
Flow Preventers Stainless Steel Hoses Mounting Hardware Batteries Pre-installed
All the hardware necessary for satisfactory installation
Specifications and Dimensions
Spout: Solid Brass Power: 4 (AA) Alkaline
Batteries or AC Adapter
Battery life expectancy: 250,000 cycles
Solenoid valve: 6 Volt magnet latching
Working Water Pressure: 1 PSI -100 PSI
Supply Inlet Size: 1/2” NPT Male
Water Temperature Control;
check
Options for temperature control sensor faucets
Built-in Pop-Up Drain
Rod: N/A
Sensor type and Location: Active Infrared, Neck mount Sensor
Microprocessor: Digital,
Pug And Play Sensing Range: 2” to 6”
Response Time: 0.3 Second
Shut-Off Delay Time: 2 Seconds
Anti vandalism maximum Running Time: 60 Seconds
Particle filter size: 50
Mesh Aerator: 2.2 GPM Standard
Features
BRAVAT COMMERCIAL SENSOR SYSTEM
Bravat Commercial™
Commercial automatic sensor faucet and soap dispenser with solid brass
construction, infrared AI sensing, adjustable shutoff,
and AC/DC power operation.
✥
Sensor Calibration Procedure?
+
Complete commissioning after the basin,
countertop and surrounding accessories are installed.
The micro-computer controlled infrared system
self-adjusts its sensing zone according to the
lavatory shape and surrounding surfaces.
◇
Hydraulic Checks During Installation?
+
Flush the supply piping before final connection,
verify the DN15 water connections, inspect the
built-in strainer for debris, and confirm stable
dynamic pressure before commissioning the
electronic solenoid assembly.
◯
Flow Rate Verification?
+
Verify approximately 2.2 GPM through the standard
mesh aerator under normal operating conditions.
Restricted discharge should be checked against
the aerator, 50-mesh filter, supply piping and
available dynamic pressure.
↻
Touchless System Diagnostics?
+
Clean the faucet and soap-dispenser sensor windows,
remove reflective interference from the detection
zones, verify stable power, inspect the faucet
solenoid, and confirm proper soap supply if either
touchless component fails to respond.
⌁
Sensor Detection Range?
+
The active infrared sensor provides an adjustable
2 to 6 inch sensing range. BathSelect also lists
a factory detection zone of approximately
25 cm / 10 inches under standard test conditions.
⌂
Operating Water Pressure?
+
Maintain stable inlet pressure within approximately
10 to 125 PSI. The technical specification also
lists a hydraulic operating range of approximately
0.05–0.7 MPa for commercial installations.
⚡
Power Supply Options?
+
The electronic system supports AC110V hardwired
operation and DC6V battery power. The faucet
uses a 6-volt magnet-latching solenoid and can
also operate from alkaline batteries.
⌕
Routine Maintenance Requirements?
+
Periodically clean both sensor windows and the
aerator, service the built-in strainer, inspect
power and water connections, maintain soap
delivery components, and verify positive
automatic shutoff.
‹
›
Polished Gold
♧
2.2 GPM
Controlled Flow
◇
Solid Brass
Vandal Resistant
⌁
Infrared AI
Adjustable Sensing
⚙
30 Sec Shutoff
Automatic Control
Activation Drift 
Fixture Issues Rare 
